Brother International Innov-is VM5200 Operation Manual - Page 121
Smocking Stitches
View all Brother International Innov-is VM5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
c Select a stitch for top stitching. d Place the machine, fabric right side up in the and center the presser foot over the seam when sewing. SEWING THE STITCHES e Pull the bobbin threads to obtain the desired amount of gather, and then smooth the gathers by ironing them. S 2 Utility Stitches f Select or . a Right side of fabric Smocking Stitches Use smocking stitches for decorative sewing on clothes, etc. a Select a straight foot "J". stitch and attach presser b Set the stitch length to 4.0 mm (approx. 3/16 inch) and loosen the upper thread tension to approximately 2.0 (see "Setting the Stitch Length" on page S-10 and "Setting the Thread Tension" on page S-12). c Pull the bobbin and upper threads 50 mm (approx. 2 inches). out by d Sew the seams, leaving approximately 10 mm (approx. 3/8 inch) between the seams, then trim excess thread, leaving 50 mm (approx. 2 inches). Memo • For details on each stitch, refer to the "STITCH SETTING CHART" on page S-67. g Sew the spaces between the straight seams. h Pull out the straight stitch threads. a Approximately 10 mm (approx. 3/8 inch) Sewing S-51