Brother International Innov-is VM5200 Operation Manual - Page 61
Attaching the Embroidery Foot
View all Brother International Innov-is VM5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Attaching the Embroidery Foot "W" CAUTION • When attaching a presser foot, always press on the screen to lock all keys and buttons. You may accidentally press the "Start/Stop" button and possibly cause injury. • Be sure to use embroidery foot when doing embroidery. Using another presser foot may cause the needle to strike the presser foot, causing the needle to bend or break and possibly cause injury. a Press the "Needle the needle. Position" button to raise BEFORE EMBROIDERING d Push the black button on the presser holder and remove the presser foot. foot B 1 Getting Ready a Black button b Presser foot holder Remove the presser foot from the presser foot holder. e Use the included screwdriver to loosen screw of the presser foot holder, then the remove the presser foot holder. b Press to lock all keys and buttons. The entire screen becomes white, and all keys and operation buttons are locked. CAUTION • When attaching a presser foot, always press on the screen to lock all keys and buttons. You may accidentally press the "Start/Stop" button and possibly cause injury. c Raise the presser foot lever. a Screwdriver b Presser foot holder c Presser foot holder screw Remove the presser foot holder. f Position the embroidery foot "W" on the presser foot bar by aligning the notch of the presser foot to the large screw. Side view Basic operations B-59