Brother International Innov-is VM5200 Operation Manual - Page 206
along the stitching. After cutting, remove all
View all Brother International Innov-is VM5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
SEWING AN EMBROIDERY PATTERN a Attach side of an iron-on stabilizer to the appliqué material. the wrong d Place the frame. base material into the embroidery a Appliqué material (cotton, felt, etc.) b Iron-on stabilizer b Place the appliqué material into the embroidery frame, and then press the "Start/Stop" button to sew the outline of the appliqué. a Base material e Press the "Start/Stop" button position of the appliqué. to sew the * Use the same thread color you plan to use when attaching the appliqué in step g. a Outline of appliqué b Appliqué material Memo • The embroidery procedure is the same as the basic procedure explained on page E-22. The machine will sew around the outline of the appliqué pieces and will then stop. c Remove the appliqué material from the embroidery frame, and then cut carefully along the stitching. After cutting, remove all of the stitching thread carefully. * Carefully cut out the pattern on the outline you just sewed. Do not cut inside the stitching line, as the appliqué fabric will not be caught by the appliqué stitch. a Position of appliqué b Base material The machine will sew around the position of the appliqué and will then stop. f Apply a thin layer of adhesive to the back adhesive or spray of the appliqué piece and attach it to the appliqué position so that it follows the seam of the outline. Memo • If the appliqué material is a lightweight fabric, you may want to use a fusible web on the back to stabilize the fabric and for appliqué placement. Fuse appliqué in place with an iron. Do not remove fabric from the frame to iron the appliqué material. E-24