Brother International Innov-is VM5200 Operation Manual - Page 68

USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE Note • The connectors on the USB cable can only be inserted into a port in one direction. If it is difficult to insert the connector, do not insert it with force. Check the orientation of the connector. • For details on the position of the USB port on the computer (or USB hub), refer to the instruction manual for the corresponding equipment. ■ Clicking a Key When the mouse is connected, the pointer appears on the screen. Move the mouse to position the pointer over the desired key, and then click the left mouse button. Memo • Double-clicking has no effect. Using a USB Mouse The USB mouse, connected to the sewing machine, can be used to perform a variety of operations in the screens. Note • If a mouse other than the optional USB mouse is used, it may not perform as described in this Operation Manual. a a Pointer ■ Changing Pages Rotate the mouse wheel to switch through the tabs of the pattern selection screens. Memo • If page numbers and a vertical scroll bar for additional pages are displayed, rotate the mouse wheel or click the left mouse button with the pointer on / or / to display the previous or next page. a USB port for mouse/media (USB 2.0) b USB mouse Note • Do not perform operations with the mouse at the same time that you are touching the screen with your finger or the included touch pen. • A USB mouse can be connected or disconnected at any time. • Only the left mouse button and its wheel can be used to perform operations. No other buttons can be used. • The mouse pointer does not appear in the opening screen. B-66