Brother International Innov-is VM5200 Operation Manual - Page 62

BEFORE EMBROIDERING g Hold the embroidery foot your right hand, and then in place with use the included screwdriver to securely tighten the presser foot holder screw. b Position the LED pointer embroidery foot "W+" on the presser foot bar with by aligning the notch of the presser foot to the large screw. Side view CAUTION • Use the included screwdriver to firmly tighten the screw of the embroidery foot. If the screw is loose, the needle may strike the presser foot and possibly cause injury. h Press buttons. to unlock all keys and  All keys and operation buttons are unlocked, and the previous screen is displayed. Using the Optional Embroidery Foot "W+" with LED Pointer By plugging in the connector on the back of your machine, the embroidering needle drop point will be indicated on the fabric, allowing you to accurately position the pattern. ■ Attaching the Embroidery Foot "W+" with LED Pointer CAUTION • When attaching a presser foot, always press on the screen to lock all keys and buttons. You may accidentally press the "Start/Stop" button and possibly cause injury. • Be sure to use embroidery foot when doing embroidery. Using another presser foot may cause the needle to strike the presser foot, causing the needle to bend or break and possibly cause injury. a Follow the steps from a to e of "Attaching the Embroidery Foot "W"" on page B-59. c Hold the embroidery foot your right hand, and then in place with use the included screwdriver to securely tighten the presser foot holder screw. CAUTION • Use the included screwdriver to firmly tighten the screw of the embroidery foot. If the screw is loose, the needle may strike the presser foot and possibly cause injury. d Plug the connector of the embroidery foot "W+" with LED pointer into the jack on the back of your machine. e Press buttons. to unlock all keys and  All keys and operation buttons are unlocked, and the previous screen is displayed. B-60