Brother International Innov-is VM5200 Operation Manual - Page 65
Removing the Embroidery Unit
View all Brother International Innov-is VM5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
BEFORE EMBROIDERING b Insert the embroidery unit connection into the machine connection port. The spring ■ Removing the Embroidery Unit hinge on the connection port cover will allow easy access to the port. Push lightly on the connection port cover until the unit clicks into place. a Press either . or , then press B 1 The carriage will move to the removal position. Getting Ready a Embroidery unit connection b Machine connection port Note • Be sure there is no gap between the embroidery unit and the sewing machine. If there is a gap, the embroidery patterns will not embroider with the correct registration. • Do not push on the carriage when installing the embroidery unit onto the machine. Moving the carriage may damage the embroidery unit. c Turn the main power to ON. The following message will appear. CAUTION • Always remove the embroidery frame before pressing . Otherwise, the frame may strike the embroidery foot, and possibly cause injury. • The embroidery unit will not fit in the storage case if this step is not done. b Turn the main power to OFF. Note • Be sure to turn off the machine before removing the embroidery unit, otherwise damage to the machine may result. d Press . The carriage will move to the initialization position. Note • Either "Embroidery" screen or "Embroidery Edit" screen appears, depending on the setting selected in the settings screen. Basic operations B-63