Brother International Innov-is VM5200 Operation Manual - Page 64

BEFORE EMBROIDERING d Press .  The Embroidery Foot "W+" with LED Pointer Adjustment screen appears. a a LED pointer adjustment Note • The specified setting is saved in the machine's memory. This is useful for positioning during continuous embroidering. • For normal use, return the setting to "00". e Use that it or to adjust the LED pointer indicates the actual needle drop so point. f Press screen. twice to return to the original ■ Adjusting the Brightness of the LED Pointer a Follow the steps from a to d to display the embroidery foot with LED pointer adjust screen. b Use or to the LED pointer. adjust the brightness of Attaching the Embroidery Unit ■ About the Embroidery Unit CAUTION • Do not move the machine with the embroidery unit attached. The embroidery unit could fall off and cause injury. • Keep your hands and foreign objects away from the embroidery carriage and frame when the machine is embroidering. Otherwise, injury may result. • To avoid distorting your embroidery design, do not touch the embroidery carriage and frame when the machine is embroidering. Note • You can also sew utility/decorative stitches with the embroidery unit attached. Touch and . The feed dog will automatically raise for utility and decorative stitching. • Be sure to turn off the power before installing the embroidery unit. Otherwise, the machine may be damaged. • Do not touch the inner connector of the embroidery unit. The pins on the embroidery unit connection may be damaged. • Do not apply strong force to the embroidery unit carriage or pick up the unit by the carriage. Otherwise, the embroidery unit may be damaged. • Store the embroidery unit in the proper storage case. a Turn the main power to OFF, the flat bed attachment. and remove c Press screen. twice to return to the original B-62