Brother International Innov-is VM5200 Operation Manual - Page 276
Install the needle plate cover and bobbin, cover with tabs., Install the flat bed attachment or,
View all Brother International Innov-is VM5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
PREPARING FOR BOBBIN WORK p Install the needle cover with tabs. plate cover and bobbin For details on installing the needle plate cover, refer to "Cleaning the Race" on page A-19. a Bobbin cover b Bobbin cover with tabs CAUTION • When creating bobbin work, use the bobbin cover with tabs, otherwise the thread may become tangled or the needle may break. Note • When installing the needle plate cover, do not allow it to pinch the thread. q Install the flat bed embroidery unit. attachment or Note • When installing the flat bed attachment or embroidery unit, do not allow it to pinch the thread. • When the bobbin thread is replaced with a new one, be sure to repeat the procedure from a, otherwise the lower threading will not be done correctly. This completes the upper and lower threading. Note • If utility stitches are to be used, refer to "CREATING BOBBIN WORK (SEWING)" on page A-9. If embroidery patterns are to be used, refer to "CREATING BOBBIN WORK (EMBROIDERY)" on page A-12. A-8