Brother International Innov-is VM5200 Operation Manual - Page 69

USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE Using the Optional Dual Feed Foot Dual feed foot enables you to have best fabric control when sewing difficult fabrics that slip easily, such as quilted fabrics or fabrics that tend to stick to the bottom of a presser foot, such as vinyl, leather or synthetic leather. CAUTION B • Use the included screwdriver to firmly tighten the screw. If the screw is loose, the needle may strike the presser foot and possibly cause 1 injury. d Plug the connector of the dual feed foot into the jack on the back of your machine. Getting Ready Note • When sewing with the dual feed foot, sew at medium to low speeds. Memo • When selecting stitches to be used with the dual feed foot, only the stitches that can be used will be activated on the display. • When sewing fabric that easily sticks together, a more attractive finish can be achieved by basting the beginning of sewing. ■ Attaching the Dual Feed Foot a Follow the steps from a to e of "Attaching the Embroidery Foot "W"" on page B-59. b Position foot bar the dual feed foot to the presser by aligning the notch of the dual feed foot to the large screw. Side view e Press buttons. to unlock all keys and  All keys and operation buttons are unlocked, and the previous screen is displayed. ■ Attaching/detaching toe Attach the toe by aligning the pins with the notches and snap it into place. c Hold the dual feed foot in place with right hand, then using the included your screwdriver securely tighten the large screw. a Pins b Notches Basic operations B-67