Brother International MFC-9460CDN Network Users Manual - English - Page 10
Uncon d, STATIC, Boot Method BOOT Method, IP Address, Subnet Mask, Gateway
UPC - 012502625117
View all Brother International MFC-9460CDN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Changing your machine's network settings c Double-click the unconfigured device. Windows® Macintosh 2 Note • If the print server is set to its factory default settings (if you do not use a DHCP/BOOTP/RARP server), the device will appear as Unconfigured in the BRAdmin Light utility screen. • You can find the Node Name and MAC Address (Ethernet Address) by printing the Network Configuration List. (See Printing the Network Configuration List on page 36 for information on how to print the Network Configuration List on your print server.) You can also find the Node Name and MAC Address from the control panel. (See Chapter 5: Control panel setup.) d Choose STATIC from Boot Method (BOOT Method). Enter the IP Address, Subnet Mask and Gateway (if needed) of your print server. Windows® Macintosh e Click OK. f With the correctly programmed IP address, you will see the Brother print server in the device list. 5