Brother International MFC 9650 Owners Manual - Page 41
, Getting Started 31, Setting the Dialling Mode (Tone/Pulse), Setting the Date and Time - mfc
View all Brother International MFC 9650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
4C H A P T E R F O U R Initial Setup 31 Getting Started Setting the Dialling Mode (Tone/Pulse) Your machine is initially set to TONE. If you are using a PULSE dial line, you can change the setting to PULSE by following the steps below. 1 For the FAX-8350P, Press Menu, 1, 1. For the MFC-9650/FAX-8750P, Press Menu, 1, 1, 1. The screen prompts you to select TONE or PULSE. DIALLING:TONE SELECT { } & SET DIALLING:PULSE SELECT { } & SET 2 Use or to select the dialling mode. 3 Press Set when the screen displays the dialling mode you want. 4 Press Stop to exit. Setting the Date and Time Your machine displays the date and time, and prints it on every fax you send. In the event of a power failure, the machine maintains date and time information for about 9 hours. All other settings remain unaffected.