Brother International MFC 9650 Owners Manual - Page 47
Setting the Speaker Volume, Memory Storage, Memory Security (Only for FAX-8350P/FAX-8750P)
View all Brother International MFC 9650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
37 I N I T I A L S E T U P Setting the Speaker Volume You can adjust the speaker volume when your machine has dialled (onhook dialling) and the line is connected. You can turn the volume OFF or you can select a volume level. Press or to adjust the volume level. The display shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again. Setting the Ring Volume You can adjust the ring volume when your machine is idle. You can turn the ring OFF. Press or to adjust the volume level. With each key press, the machine rings so you can hear the current setting and the display shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again. Memory Storage In the event of a power failure, all settings in the INITIAL SETUP, SETUP RECEIVE, SET QUICK-DIAL and REMOTE FAX OPT, plus the COVERPG SETUP and COVERPAGE NOTE (from SETUP SEND) functions are stored permanently. Memory Security (Only for FAX-8350P/FAX-8750P) This feature allows you to prevent unauthorised access to the fax machine. When switched ON, Memory Security prohibits most functions. The following functions listed are available while Memory Security is switched ON. s Receiving faxes into memory [limited by Memory Capacity]. s Scheduled Delayed Transmission* s Polling* s Fax Forwarding* s Remote Retrieval * Provided it was set before Memory Security was switched ON.