Brother International PQ1600S Operation Manual - Page 14
Winding/Installing the Bobbin
View all Brother International PQ1600S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Winding/Installing the Bobbin Bobbin Winding 4 Note • Do not move bobbin winding clutch while machine is running. 3 3 2 81 Spool Cap 1 2 82 Spool Cushion 1 5679
12
2
1
3
4
5679<A
3
1
2
Spool Cap
°
1
°
2
Spool Cushion
Spool of Thread
Winding/Installing the Bobbin
Note
•
Do not move bobbin winding clutch
while machine is running.
Bobbin Winding
1
Raise the thread guide bar all the way.
2
Mount a spool of thread on the spool pin.
✽
1
Use spool cap when using parallel-wound thread.
✽
2
Use spool cushion when using cross-wound thread.
3
Pass the thread through the
triangular hole.
4
Pass thread through bobbin
winding thread guide as shown
in drawing.
5
Run thread through top thread
notch 1, and turning the bobbin
align bottom thread notch 2 of the
bobbin with guide pin on bobbin
winder shaft.
6
Press bobbin winding clutch up against
empty bobbin. If the bobbin stop does
not slide easily between the top and
bottom of the bobbin, check that the
bobbin is seated properly with the guide
pin (
5
) inserted into the lower notch.
Bobbin
Bobbin Winder
Shaft
Guide Pin
Thread Notch 1
Thread Notch 2
Bobbin Winding Clutch