Brother International PQ1600S Operation Manual - Page 15
Bobbin Winding Clutch
View all Brother International PQ1600S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Press down Pedal 8 Place the thread end so that it does not protrude from the bobbin. Foot controller 8 Pressing down on the foot controller harder increases the winding speed. 7 While holding the end of the thread, press on the foot controller for a few seconds. Once enough thread has wound itself around the bobbin to hold itself in place, release the foot controller and trim the excess thread. 8 Start winding the bobbin again by pressing down on the foot controller. Bobbin Winding Clutch 9 Stop winding process when bobbin is full. Remove your foot from the foot controller. 0 Manually move bobbin winding clutch back to original position. A Cut thread and remove bobbin. 13
13
9
Stop winding process when bobbin
is full. Remove your foot from the
foot controller.
0
Manually move bobbin winding
clutch back to original position.
7
While holding the end of the thread,
press on the foot controller for a
few seconds. Once enough thread
has wound itself around the bobbin
to hold itself in place, release the
foot controller and trim the excess
thread.
A
Cut thread and remove bobbin.
8
Start winding the bobbin again
by pressing down on the foot
controller.
°
Place the thread end so that it does
not protrude from the bobbin.
Bobbin Winding Clutch
Foot controller
Pedal
Press down
°
Pressing down on the foot controller
harder increases the winding speed.