Brother International PQ1600S Operation Manual - Page 27

Fabric Separator for, joining lining to fabric

Get Brother International PQ1600S PDF manuals and user guides View all Brother International PQ1600S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Fabric Separator (for joining lining to fabric) ✽ Use this technique for sewing velvet and lining together. 1 Raise needle and foot. 2 Move separator so it sits under presser foot. 3 Make sure it is lined up so that the needle passes through the slot of the separator without hitting the plate itself. 4 Secure fabric separator in place with screws. 5 Set pressure of sewing feet and feed position to pin feeding position. 6 Pull thread until lower needle catches fabric. ✽ Sew 2-3 reinforcement stitches. 7 When not using separator, it can be swung off to the side as illustrated in drawing. Needle Separator Fabric Separator Needle Lining Separator Velvets Note • Lighten the presser foot pressure slightly when using the fabric separator. • Use the separator to neatly sew 2 layers of hard to manage fabrics together by keeping them from interacting with one and other before the needle sews them together in a perfect seam. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
25
Fabric Separator (for
joining lining to fabric)
✽
Use this technique for sewing
velvet and lining together.
1
Raise needle and foot.
2
Move separator so it sits under
presser foot.
3
Make sure it is lined up so that
the needle passes through the
slot of the separator without
hitting the plate itself.
4
Secure fabric separator in place
with screws.
5
Set pressure of sewing feet and
feed position to pin feeding
position.
6
Pull thread until lower needle
catches fabric.
✽
Sew 2-3 reinforcement stitches.
7
When not using separator, it
can be swung off to the side as
illustrated in drawing.
Fabric
Separator
Needle
Separator
Needle
Separator
Lining
Velvets
Note
• Lighten the presser foot pressure slightly when using the fabric separator.
• Use the separator to neatly sew 2 layers of hard to manage fabrics together by keeping them
from interacting with one and other before the needle sews them together in a perfect seam.