Brother International SB3150 Operation Manual - Page 34
Using the twin needle
View all Brother International SB3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Upper Threading Using the twin needle With the twin needle, you can sew two parallel lines of the same stitch with two different threads. Both upper threads should have the same thickness and quality. Be sure to use the twin needle, the horizontal spool pin and the appropriate spool cap. For details on the stitches that can be sewn with the twin needle, refer to "Stitch Setting Chart" beginning on page B-45. Manually thread the left needle with the upper thread. c Pass the thread through the eye of the needle from the front. Insert the horizontal spool pin onto the bobbin winder d shaft. Insert the horizontal spool pin so that it is perpendicular to the bobbin winder shaft. 1 Memo • Traditionally a twin needle is also used for creating pin tucks. Contact your nearest authorized Brother dealer to obtain the optional pin tuck foot for your machine (SA194, F069: XF5832-001). CAUTION • Only use the twin needle (2/11 needle, part code: X59296-121). Use of any other needle may bend the needle or damage the machine. • Never use bent needles. Bent needles can easily break, possibly resulting in injuries. • The needle threader cannot be used with the twin needle. If the needle threader is used with the twin needle, the machine may be damaged. Press and install the twin needle. a • If is pressed while the presser foot is raised, an error message appears. Lower the presser foot. → The screen changes, and all keys and operation buttons are locked (except ). 1 Bobbin winder shaft Swing the spool pin toward the left so that it is e horizontal. Place the upper thread spool for the needle on the right f side onto the horizontal spool pin, and then secure it with the spool cap. The thread should unwind from the front at the bottom of the spool. 1 2 • For details on installing a needle, refer to "Replacing the needle" on page B-29. Thread the upper thread for the left needle eye. b • For details, refer to steps a through l of "Threading the upper thread" on page B-21. 1 Spool cap 2 Spool B-26