Brother International SB3150 Operation Manual - Page 73

Overcasting Stitches Sewing overcasting stitches using zigzag foot "J" 1 • Using the table below, refer to "Using the utility stitch tables in the "Sewing" section" in the "Basic operations" section. Model 4 Model 3, 2 Model 1 Presser foot Stitch name Stitch Zigzag stitch Stitch number 1-09 09* 08* Zigzag stitch (Right) 2 steps elastic zigzag stitch 3 steps elastic zigzag stitch Overcasting stitch 1-11 11 10 1-13 13 11 1-14 14* 12* 1-18 18 1-19 19 16 J 17 1-20 20 18 1-21 21 19 Single diamond overcast stitch 1-22 22 - 1-23 23 - * Stitch patterns can be selected directly by pressing the numeric keys on the machine during preset utility stitch mode. Refer to "Basic operations" section. Attach zigzag foot "J". a J Select a stitch. b Sew along the edge of the fabric with the needle c dropping off the edge at the right. a 1 Needle drop point S Sewing overcasting stitches using the side cutter (sold separately with some models) UTILITY STITCHES Using the side cutter, seam allowances can be finished while the edge of the fabric is cut off. Five utility stitches can be used to sew overcasting stitches with the side cutter. • Using the table below, refer to "Using the utility stitch tables in the "Sewing" section" in the "Basic operations" section. Note • Thread the needle manually when using the side cutter, or only attach the side cutter after threading the needle using the needle threader. Model 4 Model 3, 2 Model 1 Presser foot Stitch name Stitch With side cutter … Side cutter Stitch number 1-24 24 20 1-25 25 21 1-26 26 22 S 1-27 27 23 1-28 28 24 1 Needle drop point Sewing S-13