Brother International SB3150 Operation Manual - Page 40

Replacing the Presser Foot Note • When a stitch is selected, the icon for the presser foot that should be used appears in the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, attach the appropriate presser foot. Use the screwdriver to loosen the presser foot holder c screw. Turn the screw toward the back of the machine (counterclockwise). • The presser foot holder screw can also be loosened or tightened with the disc-shaped screwdriver. Zigzag foot "J" Monogramming foot "N" Overcasting foot "G" Buttonhole foot "A" Blind stitch foot "R" Button fitting foot "M" Side cutter "S" • For details on the presser foot that should be used with the selected stitch, refer to "Stitch Setting Chart" on page B-45. 2 13 1 Screwdriver 2 Presser foot holder 3 Presser foot holder screw ■ Attaching the presser foot holder Press . a • If is pressed while the presser foot is raised, an error message appears. Lower the presser foot. → The screen changes, and all keys and operation buttons are locked (except ). Removing and attaching the presser foot holder Remove the presser foot holder when cleaning the machine or when installing a presser foot that does not use the presser foot holder, such as the walking foot and quilting foot. Use the screwdriver to remove the presser foot holder. Press . a • If is pressed while the presser foot is raised, an error message appears. Lower the presser foot. → The screen changes, and all keys and operation buttons are locked (except ). Raise the presser foot lever. b Align the presser foot holder with the lower-left side of c the presser bar. Remove the presser foot. b • For details, refer to "Replacing the presser foot" on page B-31. B-32