Brother International SB3150 Operation Manual - Page 65
Sewing thin fabrics, Sewing stretch fabrics, Sewing leathers or vinyl fabrics
View all Brother International SB3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Sewing Various Fabrics Sewing thin fabrics When sewing thin fabrics such as chiffon, the stitching may become misaligned or the fabric may not feed correctly. Move the needle (be sure to use a fine needle) to the furthest left or right hand position so that the fabric does not get pulled down into the feed dog area. If this occurs or there is shrinkage of the stitching, place non-woven water-soluble stabilizer under the fabric and sew them together. Using the straight stitch needle plate* and straight stitch foot* is also effective when sewing thin fabrics. * Sold separately with some models. Sewing leathers or vinyl fabrics When sewing fabrics that may stick to the presser foot, such as leather or vinyl fabrics, replace the presser foot with the walking foot*, non stick foot* or roller foot*. * Sold separately with some models. S 1 SEWING ATTRACTIVE FINISHES 1 1 Water-soluble stabilizer (non-woven) 1 Leather If the leather or vinyl fabric sticks to the flat bed attachment, sew with copy paper or tracing paper placed on top of the flat bed attachment so the fabric moves smoothly. If the paper is positioned so that it does not cover the needle plate, the paper will not be sewn together with the fabric. Sewing stretch fabrics First, baste the pieces of fabric together, and then sew without 1 stretching the fabric. If the stitching is misaligned, place non- woven water-soluble stabilizer under the fabric and sew them together. 1 1 Basting For best results when sewing on knit fabrics use the stretch stitches. Also be sure to use a needle for knits (Ball point needle (gold colored)). The recommended stitches and their stitch numbers are indicated below. Stitch Model 4 Model 3, 2 Model 1 1-05 05* 05* 1-06 06* 06* 1-13 13 11 1-14 14* 12* 2-13 48 42 * Stitch patterns can be selected directly by pressing the numeric keys on the machine during preset utility stitch mode. Refer to "Basic operations" section. 1 Copy paper or tracing paper Note • The walking foot can only be used with straight or zigzag stitch patterns. Do not sew reverse stitches with the walking foot. • When sewing with the walking foot, sew at a speed between slow and medium. • When using the walking foot, test sew on a scrap piece of leather or vinyl that is to be used in project to make sure foot does not leave any marks. Sewing S-5