Brother International SB3150 Operation Manual - Page 87

Appliqué, Patchwork and Quilt Stitching Appliqué, Patchwork and Quilt Stitching • Using the table below, refer to "Using the utility stitch tables in the "Sewing" section" in the "Basic operations" section. Stitch name Stitch Zigzag stitch Quilting appliqué zigzag stitch Blanket stitch Quilting appliqué stitch Piecing stitch (Right) Stitch number 1-09 09* 08* 1-33 33 28 2-03 38 33 1-34 34 29 1-29 29 25 Model 4 Model 3, 2 Model 1 Presser foot Appliqué stitching Cut out the appliqué, leaving a seam allowance a between 3 and 5 mm (1/8 and 3/16 inch). S 1 1 Seam allowance Place a pattern made of thick paper or stabilizer on the b back of the appliqué, and then fold over the seam allowance using an iron. UTILITY STITCHES Piecing stitch (Middle) Piecing stitch (Left) 1-30 30 1-31 31 26 J - Patchwork join stitch 2-07 42 36 Patchwork double overlock stitch 2-08 43 37 Couching stitch 2-09 44 38 Hand-look quilting stitch Quilting stippling stitch 1-32 32 27 1-35 35 30 * Stitch patterns can be selected directly by pressing the numeric keys on the machine during preset utility stitch mode. Refer to "Basic operations" section. Memo • Patterns showing a "Q" in the table above are for quilting and those showing a "P" are for piecing. Turn the fabric over, and then baste or fuse it onto the c fabric that it will be attached to. 1 1 Basting stitching Note • If glue is used to hold the appliqué in place on the fabric, do not apply glue to areas that will be sewn with the machine. If glue adheres to the needle or bobbin case, the machine may be damaged. Attach the zigzag foot "J" or the open toe foot (sold d Separately with some models) shown below. J … Zigzag foot "J" … Open toe foot Sewing S-27