Brother International SB3150 Operation Manual - Page 63
Sewing an even seam allowance
View all Brother International SB3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Sewing an even seam allowance To sew an even seam, start sewing so that the seam allowance is to the right of the presser foot, and the edge of the fabric is aligned with either the right edge of the presser foot or a marking on the needle plate. ■ Aligning the fabric with the presser foot Sew while keeping the right edge of the presser foot a fixed distance from the edge of the fabric. 1 2 Sewing Tips ■ Aligning the fabric with a needle plate marking The markings on the needle plate show the distance from the needle position of a seam sewn with the straight stitch (left needle position). Sew while keeping the edge of the fabric aligned with a marking on the needle plate. The distance between the markings in the upper scale is 1/8 inch (3 mm) and the distance between the markings in the grid is 5 mm (3/16 inch). For stitches with a left needle position (Stitch width: 0.0 mm) S SEWING ATTRACTIVE FINISHES 1 Seam 2 Presser foot ■ Aligning the fabric with the stitch guide foot (sold separately with some models) Sew while keeping the right edge of the fabric aligned with a desired position of markings on the stitch guide foot. 1 2 3 1 Seam 2 Presser foot 3 Centimeters 4 Inches 5 Needle plate 6 1.6 cm (5/8 inch) 1 Seam 2 Stitch guide foot 3 Markings Sewing S-3