Brother International SB3150 Operation Manual - Page 75

Buttonhole Stitching/Button Sewing Buttonhole Stitching/Button Sewing • Using the table below, refer to "Using the utility stitch tables in the "Sewing" section" in the "Basic operations" section. Model 4 Model 3, 2 Model 1 Presser foot Stitch name Stitch Narrow rounded buttonhole stitch Tapered round ended buttonhole stitch Round ended buttonhole stitch Narrow squared buttonhole stitch Stretch buttonhole stitch Heirloom buttonhole stitch Bound buttonhole stitch Keyhole buttonhole stitch Tapered keyhole buttonhole stitch Keyhole buttonhole stitch Button sewing stitch Stitch number 4-01 77 57 4-02 78 58 4-03 79 59 4-04 80 60 4-05 81 4-06 82 61 A 62 4-07 83 63 4-08 84 64 4-09 85 65 4-10 86 4-14 90 66 70 M Buttonhole sewing The maximum buttonhole length is about 28 mm (1-1/8 inches) (diameter + thickness of the button). Buttonholes are sewn from the front of the presser foot to the back, as shown below. S UTILITY STITCHES 1 Reinforcement stitching The names of parts of buttonhole foot "A", which is used to create buttonholes, are indicated below. 1 2 5 3 4 A 1 Button guide plate 2 Presser foot scale 3 Pin 4 Marks on buttonhole foot 5 5 mm (3/16 inch) Sewing S-15