Brother International SB3150 Operation Manual - Page 80

Zipper Insertion Zipper Insertion • Using the table below, refer to "Using the utility stitch tables in the "Sewing" section" in the "Basic operations" section. Stitch name Stitch Press open the seam allowance from the wrong side of d the fabric. 1 Model 4 Model 3, 2 Model 1 Presser foot Straight stitch (Middle) Stitch number 1-03 03* 03* J, I * Stitch patterns can be selected directly by pressing the numeric keys on the machine during preset utility stitch mode. Refer to "Basic operations" section. Inserting a centered zipper Stitching is sewn on both pieces of fabric butted against each other. 1 Wrong side of fabric Align the seam with the center of the zipper, and then e baste the zipper in place. 2 1 3 2 1 1 Wrong side of fabric 2 Basting stitching 3 Zipper Remove about 5 cm (2 inches) from the end of the f basting on the outside. 3 1 Right side of fabric 2 Stitching 3 End of zipper opening Attach zigzag foot "J". a Sew straight stitches up to the zipper opening. b With the right sides of the fabric facing each other, sew reverse stitches after reaching the zipper opening. Using a basting stitch, continue sewing to the edge of c the fabric. 1 3 2 4 2 4 3 1 1 Wrong side of fabric 2 Zipper basting 3 Outside basting 4 5 cm (2 inches) Attach the presser foot holder to the right pin of zipper g foot "I". 1 I 2 1 Basting stitching 2 Reverse stitches 3 Wrong side of fabric 4 End of zipper opening 1 Pin on the right side 2 Needle drop point S-20