Brother International SB3150 Operation Manual - Page 50
Saving stitch settings
View all Brother International SB3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Setting the Stitch Pushing the thread tension dial toward the right makes the thread tension tighter. Saving stitch settings If you wish to save specific settings for a stitch so that they can be used later, press after changing the settings to save the new settings with the selected stitch. This feature can be used only with utility stitches. To use a stitch length of 2.0 mm for the straight stitch Select a straight stitch. a Set the stitch length to 2.0 mm. b Note • The next time that the same straight stitch is selected, the stitch length is set to 2.0 mm. • Both of the stitch width (zigzag width) and stitch length are saved, not just the setting that was changed. With models equipped with the thread tension keys, the setting for upper thread tension is also saved, even if it was not changed. When the same stitch pattern is selected, the last settings saved are displayed even if the machine was turned off. If the settings are changed again, or if is pressed to reset the setting to its default, the new settings are not saved unless is pressed another time. Even if is pressed, the settings for programmed thread cutting and automatic reverse/reinforcement stitching cannot be reset. Press . c • To reset the selected stitch pattern back to its default settings, press , and then press . B-42