Brother International Simplicity SB530T Users Manual - English and Spanish - Page 22

KNOWING YOUR SEWING MACHINE Swing up the spool pin, and then remove 4 the spool cap. a b 1 Spool pin 2 Spool cap Fully insert the spool for the upper thread 5 onto the spool pin. Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom. Memo ● When sewing with fine, cross-wound thread, use the small spool cap, and leave a small space between the cap and the spool. c b a 1 Spool cap (small) 2 Spool (cross-wound thread) 3 Space While holding the spool with your right 7 hand, pull the thread with your left hand, and then pass the thread under the thread guide A. CAUTION ● If the spool is not positioned so that the thread unwinds correctly, the thread may become tangled around the spool pin and the thread or needle may break. ● If the spool cap that is used is smaller than the spool, the thread may catch, for example, on the notch in the spool, or the needle may break. Slide the spool cap onto the spool pin. 6 1 1 Thread guide A Pass the thread under the thread guide B 8 from the back to the front. Hold the thread with your right hand so that there is no slack in the thread that is pulled out, and then pass the thread under the thread guide B with your left hand. a 1 Thread guide B 21