Brother International Simplicity SB530T Users Manual - English and Spanish - Page 32
Thread tension
View all Brother International Simplicity SB530T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
SEWING BASICS Start sewing. 7 For details on starting to sew, refer to "Starting sewing" on page 27. X Two lines of stitching are sewn parallel to each other. ■ Upper tension is too tight Loops will appear on the surface of the fabric. Note ● If the bobbin thread was incorrectly threaded, the upper thread may be too tight. In this case, refer to "Lower threading" on page 18 and rethread the bobbin thread. Note ● When using the twin needle, the stitches may become bunched together, depending on the types of thread and fabric that are used. If this occurs, increase the stitch length. For details on adjusting the stitch length, refer to "Stitch length dial" on page 14. CAUTION ● When changing the sewing direction, be sure to raise the needle from the fabric, and then raise the presser foot lever and turn the fabric. Otherwise the needle may break or the machine may be damaged. Thread tension The tension of the thread will affect the quality of your stitches. You may need to adjust it when you change fabric or thread. Memo ● We recommend that you do a test sample on scrap of a fabric before you start to sew. ■ Correct tension Correct tension is important as too much or too little tension will weaken your seams or cause puckers on your fabric. 2 2 1 3 5 4 1 Surface of fabric 2 Back of fabric 3 Upper thread 4 Lower thread 5 Loops appear on surface of fabric Solution Reduce the tension by turning the upper tension control dial to a lower number. ■ Upper tension is too loose Loops appear on the back of the fabric. Note ● If the upper thread was incorrectly threaded, the upper thread may be too loose. In this case, refer to "Upper threading" on page 20 and rethread the upper thread. 25 1 3 4 1 Surface of fabric 2 Back of fabric 3 Upper thread 4 Lower thread 5 Loops appear on back of fabric Solution Increase the tension by turning the upper tension control dial to a higher number. 1 3 4 1 Surface of fabric 2 Back of fabric 3 Upper thread 4 Lower thread 31