Brother International Simplicity SB530T Users Manual - English and Spanish - Page 49
Symptom, Possible cause, How to put it right
View all Brother International Simplicity SB530T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Symptom Possible cause How to put it right Page ▲ The needle is bent or blunt. Replace the needle. 7 The needle is incorrectly installed. Correctly install the needle. 7 The upper thread The area around the hole in the needle plate or the presser foot is scratched. Replace the needle plate. Contact your retailer or the nearest authorized service center. - breaks. The bobbin case is scratched, or has a burr on it. Replace the bobbin case. Contact your retailer or the nearest authorized service center. - You have not used a bobbin that has been Use a bobbin that has been designed for designed for this machine. this machine. 15 You have not wound the bobbin thread properly. Wind the bobbin thread properly. 15 The lower The bobbin is scratched or does not turn smoothly. Replace the bobbin. - thread is tangled or breaks. The thread is tangled. Remove the tangled thread and clean the race. 45 You have not used a bobbin that has been Use a bobbin that has been designed for designed for this machine. this machine. 15 Bobbin is set incorrectly. Reset the bobbin thread correctly. 18 You have not threaded the upper thread properly. Correct the upper threading. 20 You have not wound the bobbin thread properly. Wind the bobbin thread properly. 15 The thread You have not threaded the right combination of thread and needle for the fabric you are using. Choose a thread and needle that are appropriate for the type of fabric. 26 tension is incorrect. You have not attached the presser foot holder properly. Attach the presser foot holder properly. - The thread tension is incorrect. Adjust the tension of the upper thread. 31 You have not used a bobbin that has been Use a bobbin that has been designed designed for this machine. for this machine. 15 6 Bobbin is set incorrectly. Reset the bobbin thread correctly. 18 You have not threaded the upper thread properly or fitted the bobbin properly. Thread the upper thread and wind the bobbin thread properly. 15-24 You have not fitted the spool properly. Fit the spool properly. 16, 29 You have not used the right combination of fabric, thread and needle. Choose a thread and needle that are appropriate for the type of fabric. 26 The fabric is The needle is bent or blunt. Replace the needle. 7 wrinkled. If thin fabrics are being sewn, the fabric is Sew with stabilizer material under the not being fed correctly. fabric. 29 If thin fabrics are being sewn, the stitch is too coarse. Shorten the stitch length. 14 The presser foot you are using is not Attach the presser foot that is correct appropriate for the type of stitch that you for the type of stitch that you want to 42 ▼ want to sew. sew. 48