Brother International LS-2125i Users Manual - English - Page 19
lever from right to left. - problem
UPC - 012502615293
View all Brother International LS-2125i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
While holding the thread as shown below, f pull it between the tension discs. Put the thread behind the needle bar thread h guide above the needle. The thread can easily be passed behind the needle bar thread guide by holding the thread in your left hand, then feeding the thread with your right hand. 1 Guide the thread through the thread take-up g lever from right to left. a Needle bar thread guide Thread the needle from front to back and pull i out about 5 cm (2 inches) of thread. a Thread take-up lever a 5 cm (2 inches) Note ● If the thread take-up lever is lowered, the upper thread cannot be wrapped around the thread take-up lever. Make sure you raise the presser foot lever and the thread take-up lever before you feed the upper thread. ● If you incorrectly feed the thread you may cause sewing problems. 17