Brother International LS-2125i Users Manual - English - Page 49
Cleaning the feed dogs - how to thread bobbin
UPC - 012502615293
View all Brother International LS-2125i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Remove the hook by grasping its center post f and pulling it out. Attach the bobbin case, the presser foot and k the needle before using the machine. Cleaning the feed dogs a Retaining ring b Hook c Hook center post Use a brush to remove any accumulated lint g and thread from the retaining ring, hook, driver and race body. CAUTION ● Make sure you unplug the machine before you clean it. Otherwise, you may get an electric shock or be injured. Turn off the machine and unplug it. a Raise the needle and the presser foot, and b then remove the presser foot and the needle. Remove the flat bed attachment and open the c shuttle cover at the front of the free arm. 4 Remove the needle plate by using a coin or d screwdriver to remove the screws. a Retaining ring b Driver c Race body Use a cloth dampened with machine oil to h wipe the shuttle race in order to remove any lint. Clean the lint from the shuttle hook in the i same manner as described in step h. Reassemble the hook and the retaining ring, j and push the latch levers back into position. Use a brush to clean the lint from the upper e part of the feed dogs and shuttle race body. a Retaining ring b Hook c Latch lever Attach the needle plate by using a coin or f screwdriver. 47