Canon PIXMA iP4820 On-Screen Manual - Page 337

Attaching/Removing the Disc Tray Page 337 of 468 pages Advanced Guide > About Disc Label Printing > Printing a Disc Label > Attaching/Removing the Disc Tray D013 Attaching/Removing the Disc Tray Attaching the Disc Tray Important Do not attach the Disc Tray until the message asking you to load the printable disc is displayed. Doing so can damage the printer. 1. Open the Paper Output Tray (A). 2. Make sure that the message asking you to load the printable disc is displayed, then open the Inner Cover (B). 3. Place the printable disc on the Disc Tray. Important Make sure that there is no dirt on the Disc Tray before placing a printable disc on the Disc Tray. When placing a printable disc on the Disc Tray, do not touch the printing surface of the disc or the reflectors (C) on the Disc Tray. 4.72 inches / 12 cm printable disc: 1. Place the printable disc on the Disc Tray with the printable surface facing up. 3.15 inches / 8 cm printable disc: