Canon PIXMA iP4820 On-Screen Manual - Page 404
Check 7: Is the Paper Feed Roller dirty?
View all Canon PIXMA iP4820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 404 highlights
Paper Is Smudged/Printed Surface Is Scratched Page 404 of 468 pages 2. On the Main sheet, select Manual for Color/Intensity, and then click Set. 3. Drag the Intensity slide bar on the Color Adjustment sheet to adjust the intensity. Check 6: Is printing performed beyond the recommended printing area? If you are printing beyond the recommended printing area of your printing paper, the lower edge of the paper may become stained with ink. Resize your original document in your application software. Printing Area Check 7: Is the Paper Feed Roller dirty? Clean the Paper Feed Roller. Routine Maintenance Note Cleaning the Paper Feed Roller will wear the roller, so perform this procedure only when necessary. Check 8: Is the inside of the printer dirty? When performing duplex printing, the inside of the printer may become stained with ink, causing the printout to become smudged. Perform the Bottom Plate Cleaning to clean the inside of the printer. Cleaning Inside the Printer Note To prevent the inside of the printer from stains, set the paper size correctly. Check 9: Set Ink Drying Wait Time longer. Doing so gives the printed surface enough time to dry so that paper smudged and scratched are prevented. 1. Make sure that the printer is turned on. 2. Open the printer driver setup window. Opening the Printer Driver Setup Window 3. Click the Maintenance tab and then Custom Settings. 4. Drag the Ink Drying Wait Time slide bar to set the wait time, and then click Send. 5. Confirm the message and click OK. Check 10: Is the paper scratched by other loaded paper? Depending on the media type, the paper may be scratched by other loaded paper when feeding from the Rear Tray. In this case, load one sheet at a time. Page top