Canon PIXMA iP4820 On-Screen Manual - Page 346

Cannot Print on the Disc Label Page 346 of 468 pages Advanced Guide > About Disc Label Printing > Troubleshooting > Cannot Print on the Disc Label D010 Cannot Print on the Disc Label Disc Label Printing Does Not Start Disc Tray Does Not Feed Properly Disc Tray Jammed Disc Label Printing Does Not Start Check 1: Is the Disc Tray placed properly? Open the Inner Cover, properly place the Disc Tray again, then press the RESUME/CANCEL button. Use the Disc Tray supplied with this printer ("G" is on the upper side). For details on how to place the Disc Tray, see Attaching/Removing the Disc Tray . Check 2: Is the printable disc placed on the Disc Tray? Place the printable disc on the Disc Tray properly, then press the RESUME/CANCEL button. Make sure that you are using the Disc Tray supplied with the printer ("G" is on the upper side). For details on how to place the Disc Tray, see Attaching/Removing the Disc Tray . Check 3: If disc label printing stops before it is complete, try the operation again. If a certain period of time has elapsed while disc label printing is in progress, the printer stops initializing. The printer resumes initializing by pressing the RESUME/CANCEL button. Try the operation again following the on-screen instructions. Disc Tray Does Not Feed Properly Check 1: Is the Disc Tray placed properly? Properly place the Disc Tray again, then press the RESUME/CANCEL button. Make sure that you are using the Disc Tray supplied with the printer ("G" is on the upper side). For details on how to place the Disc Tray, see Attaching/Removing the Disc Tray . Check 2: Unrecognizable printable disc may be placed. Canon recommends that you use printable discs specially processed to be printed on by an inkjet printer. Check 3: Is the printable disc on the Disc Tray already printed? If you place a printable disc on which has already been printed on the Disc Tray, the Disc Tray may be ejected. In this case, try printing again after clearing the Detects a printable disc in the disc tray check box in Custom Settings on the Maintenance tab in the printer driver and clicking Send. When printing is over, select the Detects a printable disc in the disc tray check box and click Send. Note If you left cleared Detects a printable disc in the disc tray check box and start printing another printable disc, printing may start without the printable disc loaded. Selecting the check box prevents the Disc Tray from getting dirty. Disc Tray Jammed