Canon PIXMA iP4820 On-Screen Manual - Page 409
Printing Does Not Start
View all Canon PIXMA iP4820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 409 highlights
Printing Does Not Start Page 409 of 468 pages Advanced Guide > Troubleshooting > Printing Does Not Start U321 Printing Does Not Start Check 1: Make sure that the power plug is securely plugged in, then turn the printer on. While the POWER lamp is flashing green, the printer is initializing. Wait until the POWER lamp stops flashing and remains lit green. Note When printing large data such as a photo or graphics, it may take longer to start printing. While the POWER lamp is flashing green, the computer is processing data and sending it to the printer. Wait until printing starts. Check 2: Check the status of ink tanks. Replace the ink tank if ink has run out. Check 3: Open the Top Cover and check to see if the ink lamps are flashing red. If there is still sufficient ink but its ink lamp is flashing red, an ink tank may not be installed in a right position. Routine Maintenance Check 4: Open the Top Cover and make sure that the ink lamps light up red. If the ink lamp is not lit, press the mark on the ink tank until it clicks into place. Check 5: Make sure that the USB cable is securely plugged in to the printer and the computer. When the printer is connected to your computer with a USB cable, check the followings: If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details. There could also be a problem with the USB cable. Replace the USB cable and try printing again. Check 6: Restart your computer if you are printing from the computer. If there are any unnecessary print jobs, delete them. Deleting the Undesired Print Job Check 7: Make sure that the Inner Cover is closed. If the Inner Cover is opened, close the Inner Cover and press the RESUME/CANCEL button on the printer. Check 8: Make sure that your printer's name is selected in the Print dialog box. The printer will not print properly if you are using a printer driver for a different printer.