Canon PIXMA iP4820 On-Screen Manual - Page 45
of 468 s, Replacing an Ink Tank
View all Canon PIXMA iP4820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Replacing an Ink Tank Do not push the sides of the ink tank. If you push the sides of the ink tank with the L-shape air hole (D) blocked, ink may splash. Do not touch the inside of the orange protective cap (E) or the open ink port (F). The ink may stain your hands if you touch them. Do not reattach the protective cap (E) once you have removed it. Discard it according to the local laws and regulations regarding disposal of consumables. 5. Install the new ink tank. (1) Insert the front end of ink tank into the Print Head at a slant. Make sure that the position of the ink tank matches the label. Page 45 of 468 pages (2) Press the mark (Push) on the ink tank until the ink tank snaps firmly into place. Make sure that the ink lamp lights up red. Important You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in the correct position according to the label on the Print Head Holder. You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks. 6. Close the Top Cover. Note If the Alarm lamp still flashes orange after the Top Cover is closed, refer to "Alarm Lamp Flashes Orange" in " Troubleshooting " of the on-screen manual: Advanced Guide . When you start printing after replacing the ink tank, the printer starts cleaning the Print Head automatically. Do not perform any other operations until the printer completes the cleaning of the Print Head. While cleaning is in progress, the POWER lamp is flashing green. If printed ruled lines are misaligned or the print head position is misaligned, adjust the print head position. See Aligning the Print Head .