Casio WK3800 User Guide - Page 96

Saving Data 2 Press the [̄] CURSOR button to display the Card Mode (or Disk Mode) menu. 3 Use the [̇] and [̈] CURSOR buttons to display the "Format" screen. 4 Press the [̄] CURSOR button. • WK-3800 Users If you are formatting a floppy diskette, a screen will appear here for specification of the floppy diskette density. Use the [̇] and [̈] CURSOR buttons to select either "2DD" or "2HD", and then press the [̄] CURSOR button. IMPORTANT! • When formatting a floppy diskette, make sure you select the format that matches the type of diskette (2DD or 2HD) you are using. • This will display a confirmation message asking whether you really want to format the media. 5 Press the YES button to start formatting. • This will cause the message "Pls Wait" to appear on the display to indicate that a card access operation is being performed. Never try to perform any other operation on the keyboard while the card is being accessed. The message "Complete" will appear on the display after media formatting is complete. After a few seconds, the message will be replaced by the screen for the type of operation. • If you do not want to continue with formatting, press the EXIT button or the NO button in response to the above confirmation message. This will return you to the screen for the type of operation. 6 After you are finished performing the format operation, press the DISK/CARD button (CARD button on the WK-3300/WK-8000) to exit the Card Mode. Inputting Characters The following describes the types of characters you can input when saving data to the user area and external storage media. User Area Data External Storage Media Data You can input the same characters as those that are allowed for MS-DOS file names. E-94 B