Cisco 7961G Administration Guide - Page 112

Network Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-2 Network Configuration Menu Options (continued) Option Description To Change TFTP Server 2 Optional backup TFTP server that 1. Unlock the CTL file, if necessary. the phone uses if the primary TFTP 2. Unlock network configuration options. server is unavailable. If neither the primary TFTP server nor the backup TFTP server is listed in the CTL file on the phone, you must unlock the CTL file before you 3. Enter an IP address for the TFTP Server 1 option. 4. Scroll to the TFTP Server 2 option, press the Edit softkey, and then enter a can save changes to the TFTP Server new backup TFTP server IP address. 2 option. In this case, the phone will 5. Press the Validate softkey, and then delete the CTL file when you save press the Save softkey. changes to the TFTP Server 2 option. For information about the CTL file, refer to Cisco Unified CallManager Security Guide. For information about unlocking the CTL file, see to the "Security Configuration Menu" section on page 4-25. Default Router 1 Default router used by the phone 1. Unlock network configuration options. Default Router 2 (Default Router 1) and optional 2. Set the DHCP Enabled option to No. backup routers (Default Router 2-5). Default Router 3 3. Scroll to the appropriate Default Router Default Router 4 Default Router 5 option, press the Edit softkey, and then enter a new router IP address. 4. Press the Validate softkey. 5. Repeat Steps 3 and 4 as needed to assign backup routers. 6. Press the Save softkey. 4-10 Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager OL-11528-01