Cisco 7961G Administration Guide - Page 127

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu Enable this option if an application that requires monitoring of the phone's traffic is being run on the access port. These applications include monitoring and recording applications (common in call center environments) and network packet capture tools that are used for diagnostic purposes. Use Cisco Unified CallManager Administration > Device > Phone > Phone Configuration. Security Configuration Menu The Security Configuration menu that you display from the Device Configuration menu displays settings that relate to security for the phone. Note The phone also has a Security Configuration menu that you access directly from the Settings menu. For information about the security options on that menu, see the "Security Configuration Menu" section on page 4-29. Table 4-7 describes the options on the Security Configuration menu. Table 4-7 Security Configuration Menu Options Option Description To Change PC Port Disabled Indicates whether the access port on the Use Cisco Unified CallManager phone is enabled (Yes) or disabled Administration > Device > Phone > (No). Phone Configuration. Must be set to enabled for video support on the phone GARP Enabled Indicates whether the phone learns MAC addresses from Gratuitous Address Resolution Protocol (ARP) responses. Disabling the phone's ability to accept Gratuitous ARP will prevent applications that use this mechanism to monitor and record voice streams from working. If voice monitoring is not desired, set this option to No (disabled). Use Cisco Unified CallManager Administration > Device > Phone > Phone Configuration. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager OL-11528-01 4-25