Cisco 7961G Administration Guide - Page 96
Installing the Wall Mount, Kit for the Cisco Unified IP Phone, Before You Begin, Procedure
UPC - 746320949147
View all Cisco 7961G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Adjusting the Placement of the Cisco Unified IP Phone Chapter 3 Setting Up the Cisco Unified IP Phone Before You Begin To ensure that the handset attaches securely to a wall-mounted phone, remove the handset wall hook from the handset rest, rotate the hook 180 degrees, and reinsert the hook. Turning the hook exposes a lip on which the handset catches when the phone is vertical. For an illustrated procedure, refer to Installing the Wall Mount Kit for the Cisco Unified IP Phone. Caution Use care not to damage wires or pipes located inside the wall when securing screws to wall studs. Procedure Step 1 Step 2 Step 3 Step 4 Push in the footstand adjustment button. Adjust the footstand so it is flat against the back of the phone. Insert two screws into a wall stud, matching them to the two screw holes on the back of the footstand. The keyholes fit standard phone jack mounts. Hang the phone on the wall. 3-16 Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager OL-11528-01