Cisco 7961G Administration Guide - Page 76

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network Adding Phones to the Cisco Unified CallManager Database After you have collected MAC addresses, in Cisco Unified CallManager Administration, choose Device > Phone and click Add New to begin. For complete instructions and conceptual information about Cisco Unified CallManager, refer to Cisco Unified CallManager Administration Guide and to Cisco Unified CallManager System Guide. Related Topics • Adding Phones with Auto-Registration, page 2-13 • Adding Phones with Auto-Registration and TAPS, page 2-14 • Adding Phones with BAT, page 2-16 Adding Phones with BAT The Cisco Bulk Administration Tool (BAT) is a plug-in application for Cisco Unified CallManager that enables you to perform batch operations, including registration, on multiple phones. Before you can add phones using BAT only (not in conjunction with TAPS), you must obtain the MAC address for each phone. For information about determining a MAC address, see the "Determining the MAC Address for a Cisco Unified IP Phone" section on page 2-19. For detailed instructions about using BAT, refer to Cisco Unified CallManager Administration Guide and to Cisco Unified CallManager Bulk Administration Guide. Related Topics • Adding Phones with Auto-Registration, page 2-13 • Adding Phones with Auto-Registration and TAPS, page 2-14 • Adding Phones with Cisco Unified CallManager Administration, page 2-15 2-16 Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager OL-11528-01