Cisco 7961G Administration Guide - Page 124

Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-6 Media Configuration Menu Options (continued) Option Recording Tone Description To Change Indicates whether a recording tone (often referred to as a beep tone) is enabled or disabled for the phone. If the recording tone option is enabled, the phone plays the beep tone in both directions of every call, regardless of whether the call actually gets recorded. The beep tone first sounds when a call is answered. Use Cisco Unified CallManager Administration > Device > Phone > Phone Configuration. You may want to notify your users if you enable this option. Default: Disabled Related Parameters: • Recording Tone Local Volume • Recording Tone Remote Volume • Recording Tone Duration Note Other related parameters-Beep tone frequency in hz, the length of the beep tone (called duration), and how often the beep tone plays (called interval)-are defined on a per-Network Locale basis in the xml file that defines tones. This xml file is usually named tones.xml or g3-tones.xml. 4-22 Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager OL-11528-01