Cisco 7961G Administration Guide - Page 79

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network Determining the MAC Address for a Cisco Unified IP Phone Deploying a Phone in an SCCP and SIP Environment To deploy Cisco Unified IP Phones in an environment that includes SCCP and SIP and in which the Cisco Unified CallManager Auto-Registration parameter is SCCP, perform these general steps: 1. Set the Cisco Unified CallManager auto_registration_protocol parameter to SCCP. To do so, from Cisco Unified CallManager Administration, choose System > Enterprise Parameters. 2. Install the phones. 3. Change the auto_registration_protocol parameter to SIP. 4. Auto-register the SIP phones. Determining the MAC Address for a Cisco Unified IP Phone Several procedures described in this manual require you to determine the MAC address of a Cisco Unified IP Phone. You can determine a phone's MAC address in these ways: • From the phone, press the Settings button and select Model Information and look at the MAC Address field. • Look at the MAC label on the back of the phone. • Display the web page for the phone and click the Device Information hyperlink. For information about accessing the web page, see the "Accessing the Web Page for a Phone" section on page 8-2. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager OL-11528-01 2-19