Cisco 7961G Administration Guide - Page 115

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Network Configuration Menu Table 4-2 Network Configuration Menu Options (continued) Option SW Port Configuration Description To Change Speed and duplex of the network port (labeled 10/100 SW on the 7961G and 7941G; labeled 10/100/100 SW on the 7961G-GE and 7941G-GE). Valid values: • Auto Negotiate • 10 Half-10-BaseT/half duplex 1. Unlock network configuration options. 2. Scroll to the SW Port Configuration option and then press the Edit softkey. 3. Scroll to the setting that you want and then press the Select softkey. 4. Press the Save softkey. • 10 Full-10-BaseT/full duplex • 100 Half-100-BaseT/half duplex • 100 Full-100-BaseT/full duplex • 1000 Full-1000-BaseT/full duplex If the phone is connected to a switch, configure the port on the switch to the same speed/duplex as the phone, or configure both to auto-negotiate. If you change the setting of this option, you must change the PC Port Configuration option to the same setting. Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager OL-11528-01 4-13