Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 14
Removing Bezel Blanks, CAUTION
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Removing Bezel Blanks 1. Shut down the operating system properly, then turn off the computer and any external devices. Disconnect the power cord from the power outlet and disconnect any external devices. 2. Remove the computer access panel. 3. Remove the front bezel. 4. Gently pull the subpanel, with the bezel blanks secured in it, away from the front bezel, then remove the desired bezel blank. CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel. Removing Bezel Blanks from the Subpanel (Desktop Shown) ✎ When replacing the subpanel, ensure that the aligning pins and any remaining bezel blanks are in their proper orientation. 2-4 Upgrading the Compaq Deskpro EP Series