Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 96
Sliding Out the System Board Tray
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Sliding Out the System Board Tray The slide-out system board tray allows you to quickly remove the system board, without using tools. ! WARNING: Before removing the computer access panel, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet. 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, then turn off the computer and any external devices. 3. Disconnect the power cord from the power outlet. 4. Remove the computer access panel and turn the minitower on its side, with the open side up. 5. Raise the expansion card cage into service position 2. You do not need to remove the cage from the chassis. 5-4 Upgrading the Compaq Deskpro EN Series, Minitower Model