Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 19
Gently slide the drive into the bay. When the drive is, properly inserted
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
7. Before you install each drive into the chassis, turn it so that it is perpendicular to the internal 3.5-inch drive. The bottom of the drive should be parallel to drivelock 2. ✎ The diskette drive should always be placed in the bay nearest the top of the chassis in the desktop configuration for proper drive clearance and access. Installing a Drive in the Desktop Configuration 8. Gently slide the drive into the bay. When the drive is properly inserted, the drivelock will secure it. CAUTION: The use of unnecessary force may result in damage to the drives. 9. Reconnect all power and data cables to the drives in the 5.25-inch drive bays. Making Hardware Changes 2-9
Making Hardware Changes
2-9
7.
Before you install each drive into the chassis, turn it so that
it is perpendicular to the internal 3.5-inch drive. The
bottom of the drive should be parallel to drivelock
2
.
The diskette drive should always be placed in the bay
nearest the top of the chassis in the desktop configuration
for proper drive clearance and access.
Installing a Drive in the Desktop Configuration
8.
Gently slide the drive into the bay. When the drive is
properly inserted, the drivelock will secure it.
CAUTION:
The use of unnecessary force may result in damage to
the drives.
9.
Reconnect all power and data cables to the drives in the
5.25-inch drive bays.