Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 57
Remove the bezel blank from the front bezel, if necessary
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
5. Return the easy access drive bay to the normal position and connect the ribbon cable to the rear of the drive. ✎ The ribbon cable is a multifunction cable that carries power, audio, and data between the system board and the DVD-ROM drive. Connecting the Ribbon Cable to the DVD-ROM Drive 6. Remove the bezel blank from the front bezel, if necessary. 7. Replace the computer cover. 8. The system will automatically recognize the drive and reconfigure the computer. CAUTION: When servicing the computer, ensure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. CAUTION: Use only 3/16-inch or 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive. 3-18 Upgrading the Compaq Deskpro EN Series, Small Form Factor