Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 89

Removing a Drive from the Drive Cage, outlet, and remove the computer cover.

Get Compaq 470007-802 - Deskpro EN - 256 MB RAM PDF manuals and user guides View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

Removing a Drive from the Drive Cage 10. Reconfigure the computer, if necessary. Refer to Appendix B, "Computer Setup Utilities," for more information. ✎ If you have installed a second diskette drive (B), you will need to reconfigure the computer, using Computer Setup, to recognize the B drive. Choose the Storage/Diskette Drives option, to enable the drive and select the drive size. 11. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor. 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, turn off the computer, disconnect the power cord from the electrical outlet, and remove the computer cover. 3. Grasp the top of the tilt drive cage and rotate it to its upright position. 4. Disconnect the drive power and signal cables and, if it is a CD-ROM drive, disconnect the audio connector. CAUTION: Before completing the following step, note that the drive slides easily out of the drive cage. Do not allow the drive to strike a hard surface as it exits the drive cage. Excessive shock can damage the drive. Making Hardware Changes 4-29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
Making Hardware Changes
4-29
10. Reconfigure the computer, if necessary. Refer to Appendix
B, “Computer Setup Utilities,” for more information.
If you have installed a second diskette drive (B), you will
need to reconfigure the computer, using Computer Setup,
to recognize the B drive. Choose the Storage/Diskette
Drives option, to enable the drive and select the drive size.
11. If you normally lock the Smart Cover Lock, use Computer
Setup to relock the lock and enable the Smart Cover
Sensor.
Removing a Drive
from the Drive Cage
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock the lock and disable the Smart Cover
Sensor.
2. Shut down the operating system properly, turn off the
computer, disconnect the power cord from the electrical
outlet, and remove the computer cover.
3.
Grasp the top of the tilt drive cage and rotate it to its
upright position.
4.
Disconnect the drive power and signal cables and, if it is
a CD-ROM drive, disconnect the audio connector.
CAUTION:
Before completing the following step, note that the
drive slides easily out of the drive cage. Do not allow the drive to
strike a hard surface as it exits the drive cage. Excessive shock can
damage the drive.