Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 67
Raise the expansion card cage into service position 2. You, Remove the computer cover.
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Sliding Out the System Board Tray The slide-out system board tray allows you to quickly remove the system board, without using tools. ! WARNING: Before removing the computer cover, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet. 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, then turn off the computer and any external devices. 3. Disconnect the power cord from the power outlet. 4. Remove the computer cover. 5. Raise the expansion card cage into service position 2. You do not need to remove the cage from the chassis. 6. Grasp the back edge of the system board tray and slide it straight out of the chassis. Sliding Out the System Board Tray Making Hardware Changes 4-7