Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 63
Tilting the Drive Cage
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
✎ The configuration label located inside the computer cover provides additional information. Another label located inside the computer chassis provides information about diagnosing computer conditions using the power and hard drive LEDs. Tilting the Drive Cage The tilt drive cage allows access to all drive bays for easy installation of additional drives, requiring no drive rails or brackets. With the drive cage tilted out from the chassis, you can easily connect the drive power and signal cables. ✎ When installing optional drives, you must install guide screws to ensure the drive will line up correctly in the drive cage. Compaq has provided extra guide screws, installed in the front of the computer chassis, under the front bezel. ! WARNING: Before removing the computer cover, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet. 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, then turn off the computer and any external devices. Making Hardware Changes 4-3