Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 52
If you normally lock the Smart Cover Lock, use Computer
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
RIMM 1 and CRIMM 2 If adding Direct Rambus DRAM, you must remove the continuity module from the socket, then insert the RIMM into the socket. 7. Repeat step 6 for any additional modules that you want to install. 8. Replace the computer cover. 9. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor. The computer should automatically recognize the additional memory the next time you power on the computer. Making Hardware Changes 3-13
Making Hardware Changes
3-13
RIMM
1
and CRIMM
2
If adding Direct Rambus DRAM, you must remove the
continuity module from the socket, then insert the RIMM
into the socket.
7.
Repeat step 6 for any additional modules that you want to
install.
8. Replace the computer cover.
9. If you normally lock the Smart Cover Lock, use Computer
Setup to relock the lock and enable the Smart Cover
Sensor.
The computer should automatically recognize the
additional memory the next time you power on the
computer.